Dear Cannalovers!
Today I want to talk to you about some of the most effective ideas to improve the production cost of your buds. Some concepts that we are going to mention you already know but since many of you bring up doubts we have preferred to review it writing some words.
We all want our crop to give us the maximum production with the minimum cost?, using the minimum resources and using the minimum time possible, but you should know that any method is 100% perfect, since in nature there is no method that provides us with the cannabis panacea, giving us excellent buds without hardly offering a minimum of effort and dedication.
The technique and technology that we present you will make you optimize the yield obtained, in reference to the grams’ number of dry bud for watt of electrical energy consumed in your indoor crop.
As you know, growing marijuana indoors, either from feminized marijuana seeds or from autoflowering seeds, requires knowing the behavior of the plant against artificial lighting for each stage of its vegetative cycle, so that we apply the number of light hours that plants require, as well as the necessary light spectrum, both for the growth phase and for the flowering phase.
Let’s list the fundamental factors that directly influence the yield of your crop, measured in grams of marijuana per watt consumed:
? 1-Photoperiod in photodependent varieties
If we have chosen a feminized seed (or photodependent) we must manipulate the number of hours of light that the plants receive, for it we can program the focus by means of the use of a timer.
Nutrimatic is pre-programmed to perform 19 irrigations during the duration of the light cycle (12 or 18 hours)…..
18-hour cycle (growth):
Number of irrigations – Interval between irrigations
2 irrigations 15 minutes
5 irrigations 30 minutes
9 irrigations 60 minutes
3 irrigations 120 minutes
12-hour cycle (growth):
Number of irrigations – Intervals between irrigations
8 irrigations 15 minutes
6 irrigations 30 minutes
2 irrigations 60 minutes
2 irrigations 120 minutes
1 irrigation 60 minutes
And watch out! Because it is a very useful element that will optimize our electricity consumption.
In the growth phase, when the seedlings have their first pair of leaves they can already be placed under the light of the high intensity spotlight.
What we want is that this phase lasts as short as possible. We must make our seedlings get as much light as possible, for this we will program in the timer a number of hours of focus on 18, with 6 hours of darkness.
In this way we are optimizing our plants growth.
This phase should not last more than one month, depending on whether its root development is satisfactory or not. What we want during this month is to get as much plant mass as possible.
Once in bloom, we can do the following to optimize the electrical expense:
?????????
–In the first and second week of flowering we will program the timer to 11 hours on and 13 hours of darkness.
–For the third and fourth week of flowering we will leave it on 10´5 hours on and 13´5 hours of darkness.
–In the fifth and sixth week of flowering we will program in 10 hours on and 14 hours of darkness.
–In the seventh and eighth week of flowering we will leave it at 9´5 hours on and 14´5 hours of darkness.
To carry out this method with success you must choose very producing and short flowering marijuana varieties, since the very sativas genetics need a high number of hours of light, and of much intensity, to give a more than satisfactory production.
Almost 100% Indica varieties have worked very well with this method, providing yields of more than one gr/Watt through the use of high intensity LEC lighting equipment of 315W.
This closed reflector is made of high quality textured aluminium, its coating achieves maximum reflection and consequently high performance…
Power: 315W
Input voltage: 210-250V
Power factor: >0.95
Frequency: 50-60Hz
Length: 40cm
Width: 28cm
Height: 22cm
Weight: 6kg
? 2-Photoperiod in autoflowering varieties
If we like auto-flowering varieties, we’ll put our little ones under high intensity spotlights as soon as the seedlings show their first pair of leaves.
As with feminised, we must accelerate root growth to develop plant mass in the shortest time possible, for this we program the light timer to 20 h of light and 4 of darkness.
To optimize its yield measured in gr of bud per watt consumed we can reprogram the timer once the plant has begun to flower, leaving it at 18h, although we can always lower it if we see that the plants’ growth has been satisfactory, and its flowering meets expectations in time and in plant mass.
Everything will depend on the genetics chosen. We are always right with THC-rich varieties such as OG Kush Autoflowering from PEV Bank Seeds.
Og Kush Autoflowering guarantees high yield, so I recommend the use of advanced techniques (SCROG) to increase their performance…
Bank: Pev Bank Seeds
Type: Autoflowering feminized
Sativa Phenotype 35% / Indica 65%
Genotype: OG Kush X Rudelaris
Full cycle since germination: 70 – 80 days
Yield indoor 400 – 450 g/m2
Outdoor yield 60 – 130 g/plant
Outdoor height 80 – 160 cm
THC: 18%-22%
Or with medicinal chemotype varieties such as Afghan Kush CBD from the Worldpharma Seeds laboratory.
Afghan Kush CBD Autoflowering is the result of multiple hybridizations of cultivars coming from Hindu Kush and genotypes of industrial hemp varieties…
Laboratory: WorldPharma Seeds
Type of seed: Feminized Autoflowering
Genotype: Indica/Sativa 90%/10%
Fenotype: Hybrid morphology of the Hindu Kush
Quimiotype: 1/1 CBD/THC
CBD: 9% on average.
THC: 9% on average.
Vegetative cycle: 9 weeks.
Yield: 600-650 gr./m2
At the name of Consulting we process the information you give us in order to provide the requested service, perform the billing of the same. The data provided will be kept as long as the business relationship is maintained or for the years necessary to comply with legal obligations. The data will not be transferred to third parties except in cases where there is a legal obligation. You have the right to obtain confirmation as to whether SITE OF SHOPS ONLINE S.R.L. is processing your personal data and therefore you have the right to access your personal data, rectify inaccurate data or request its removal when the data is no longer necessary
? Growth spectrum, flowering or mixed?
The light spectrum is given by the bulb.
There are very polish growers in that sense, and change the bulb as they change the photoperiod to flowering, our experience tells us that both in growth and flowering the plant develops all types of chlorophylls. These are the ones that capture the differences in solar light spectra, without differentiating between them, either in growth or flowering.
That is why we always use mixed-spectrum bulbs.
If you grow with HPS luminaires a good choice is this:
Sodium bulbs corrected spectrum and long life. Ideal for growing and flowering….
MODELS:-Sodium 100W
-Sodium 150W
-Sodium 250W, 34,000 lumens
-Sodium 400W, 53,000 lumens
-Sodium 600W, 85,000 lumens
-Sodium 1000W, 145,000 lumens
More information about
SHP Lamp Agrolite FLO&GRO Growth and Flowering
If you prefer to move on to the new wonder of LEC lamps, their spectrum, highly optimized to imitate the sun, will make you protect yourself using sunglasses when you enter your indoor room.
Whether it’s feminized or auto-flowering seeds your starting material, we’ll always recommend mixed-spectrum bulbs for a crop that involves a full cycle. Another issue is if you are keeping cuttings or mother plants, in that case you can use fluorescent light of low consumption and blue spectrum. The low intensity will slow down its development, without causing stress to your plants.
⛳ 4-Should i place a 400, 600 or 1000w bulb?
The more luminous intensity or density of lumens reaches the plant, the more production you get, although of course, we do not want to waste a single watt.
The light density can be optimized using a lumens meter (or luxmeter):
Digital luxmeter high precision and easy to use. It has a large LCD screen 2.7 x 5 cm low consumption….
Features
It has a large LCD screen of 2.7 x 5 cm low power consumption
Manufactured with high quality materials
Ranges: from 0 to 50,000 lux in 3 ranges
Provide many years of use
This device will tell us if the focus intensity is correct according to the amount of plant mass you have in your cultivation space. You will have to measure the lumens in different points of the plant, to make sure that the light arrives homogeneously in all the vegetal surface. If it is not the case, you must use a focus of greater intensity.
The greater the space, the greater the light intensity we need, but above all, the greater the amount of plant mass, the greater light intensity is required.
⭐ Conclusion
To optimize the cost we recommend using 600W HPS spotlights or 315W LEC per square meter of growing space, with a number of plants not higher than 12, and with plant-focus distances of 60 cm in HPS, and half even if you use LEC.
Surely you will have a pleasant surprise if you start your indoor crop optimizing the light cost.
I hope that you have found useful this brief review of tips for optimizing your indoor marijuana cultivation, and do not forget to share your experience with us. Your support helps us grow with you.
See you at the next post…✍️
See you soon!?
Related Posts
In constant struggle for the regulation of cannabis, mainly in the medicinal field.
See more posts