Gi Grow Marijuana Growing Noria

In Pevgrow, we like to keep you informed of the latest developments taking place in the field of cannabis.

In this case we are pleased to present the culture system Gi-Grow 336.

This hydroponic system, shifting cultivation and 600w lamp, you'll reap 336 plants, the amount depends on the selective delivery of water which is your Gi Grow fixtures.

With growing system Gi Grow 336, you just have to worry about monitoring the nutrition for your beloved plants, for this you will have a 220 liter tank which control the solution, plus we give you different tools to get the appropriate parameters.

The wheel culture Gi Grow 336 is adjustable in speed, you also have two different wheel diameters, and thereby play with the size of the plants.

Peat plugs, are embedded in side rails with upper and lower fasteners, so that subjects are completely and no danger that plants loose.

In the case of the Gi Grow 336 system, the two 1000w lighting systems have enough power to grow up to 336 marijuana plants. 

The Cooltube that goes from part to part will dissipate the heat of the lamps so that it does not damage the temperature to the culture.

We believe that although it is an investment to consider, Gi Grow 336 leftover meet your expectations and you'll get bumper crops in minimum space.

Enjoy it !!

Dimensions of the assembled system:

GI GROW 336: 187 x 150 cm, 187 cm.

The Gi Grow 336, hydroponic system has a wheel with 24 lines of cultivation, with 14 studs peat in each.

We recommend:

To work comfortably, a minimum of 15 square meters each Gi-Grow.

Use a tubular extraction of 200 mm, with a carbon filter of the same size.

Also place a intracción of 125 mm, it will make the new air entering the crop from inside the house.

A standing fan keeps air movement within the crop.

Additionally if required to place an air conditioner to keep under control the culture temperature, the average temperature was around 26 degrees, with a maximum of 30 and minimum around 18 or 20 degrees.

Light system relating to the favorite combination for this system are two 1000 watt bulbs from the beginning of culture, with a booster of 600 watts for the central part of the bloom, this reinforcing bulb pulled out again during recent weeks.

In this same system has also grown with 4 bulbs of 600 watts, anything is possible depending on the ability installer wiring.

The ballasts are placed outside of the wheel, as far as possible, so as not to give warmth to the culture and not dangerous combinations of water and electricity are produced.

Included:
Central Cooltube with special socket
The wheel itself Gi Grow with sticks to hold the rock wool blocks of 10x10cm
The restraining structure of the cooltube and the Gi Grow wheel
Irrigation distributor
Electrical kit that connects the watering pump where the detector is located.

Not included:
Lighting equipment
Timer for photoperiod
Submersible pump (recommended 2000L / h)
Water tank 160L