Video: Assembly of a complete kit for growing cannabis indoors

And hello, Growers! So, here we have the flashlights and different configurations for the installation of the flange supports. Then, we have a flange system for the cables, and similarly, the cutter is provided.

Next, we have different flanges that will fit all ventilation systems. Here we have the light that will allow us to isolate light while letting air circulate. Also, we have a whole bunch of accessories for listening: hooks, straps, etc.

Now, let’s move on to the installation for the assembly. Nothing could be more simple; you just need to place the corners with the metal bars and slide in the box. Here, I am installing the space boosters—this is to prevent the walls from being sucked in when the extractor is running.

Now we move on to the installation of the ventilation system. We will attach the first part of the flange support inside and drill holes in the right place with the screwdriver from the outside. Then, we will screw the second part with the inner part. All that’s left is to make the hole using the cutter; it’s really very simple because the cutter is guided by the flange support.

Next, we move on to the installation of the air intake and the light baffle. Similarly, we can screw the two parts together and cut using the cutter. Then, we just insert the light baffle.

Now, we move on to the installation of the air extractor. It’s nothing simpler; with this system, you just need to clip it onto the flange support and give it a quarter turn to lock it. The same goes for the carbon filter, which we then secure everything with the strap.

Good! I am also installing the small air circulator, and we will install the flange to pass the cables. Similarly, you take the provided cutter.

Now, we just have to install the LED panel and the plants!

Hey, I hope you enjoyed this video! If so, feel free to subscribe, like, and share, not forgetting to check out our website and join our Discord servers. Right? Bye!