Vap Fip Nicokit 10ml - 10mg (80VG / 20PG) · Smooth Hit & Dense Clouds

The Vap Fip Nicokit 10ml - 10mg (80VG / 20PG) is the ultimate tool for vapers who want to turn their favorite nicotine-free e-liquids into a satisfying, cloud-chasing experience. This high-quality nicotine booster is specifically formulated with a high percentage of Vegetable Glycerin to ensure dense vapor production and a silky smooth throat hit, making it the perfect companion for your sub-ohm devices.

Is mixing your own nicotine confusing you?

You have just bought a delicious bottle of 0mg e-liquid and a nicokit, but you are staring at them with a bit of uncertainty, not knowing exactly how to mix them to get the perfect result. It is a common feeling to worry about spilling the liquid, not getting the proportions right, or simply not knowing if your device is ready for this type of density.

The consequences of improvising without a clear guide can be frustrating: a liquid that is too harsh, a coil that burns out in two days because the density isn't right, or a flavor that just doesn't taste like it should. Many vapers think the product is bad, when in reality, the issue was just a lack of precision during the mixing process.

The solution is simpler than it seems with this Vap Fip Nicokit. By following a clear, phase-based method, you can transform any shortfill into a premium e-liquid ready to vape. This guide will walk you through the process so you can enjoy your Nicotine Shots / Nic Shots / Nicotine Booster with total confidence and zero mess.

Phase 1: Preparing the ground

Before you start opening bottles, it is crucial to ensure your setup is compatible with this specific nicokit. Since this is an 80VG (Vegetable Glycerin) formula, it is much thicker than standard liquids.

• Check your device: Ensure you are using a sub-ohm tank or a dripper; this liquid is too thick for small starter pods.
• Verify the space: Make sure your 0mg e-liquid bottle (Shortfill) has enough empty space (usually 10ml or 20ml) to accommodate this nicokit.
• Clean workspace: Have a paper towel ready, as nicotine can be sticky if a drop spills.
• Shake the base: Briefly shake your 0mg Eliquid / Best Vape Flavors to ensure the aroma is well distributed before mixing.

Phase 2: Setting up the product

Now that everything is ready, it is time to perform the alchemy. This step is quick, but doing it carefully ensures you don't lose a single drop of your precious nicotine.

1. Open the Shortfill: Remove the cap and, carefully, pop off the nozzle or nib of your large e-liquid bottle.
2. Prepare the Nicokit: Open your Vap Fip Nicokit and do the same; if the nozzle is hard to remove, use a specialized tool or a dull knife edge carefully.
3. Pour it in: Empty the entire 10ml contents of the Vap Fip Nicokit into the large shortfill bottle.
4. Close and Seal: Put the nozzle back on the shortfill firmly until you hear a "click", then screw the cap on tight.
5. The Great Shake: Shake the bottle vigorously for at least 60 seconds. This is vital for the nicotine to distribute evenly throughout the VG/PG mix.

Phase 3: Use / vaping step by step

With your liquid mixed, you are almost there. However, rushing now can ruin the experience. Follow these steps to ensure the best performance from your Vape Tanks.

1. Let it settle: Ideally, let the mix sit for 10-15 minutes so the bubbles from shaking disappear.
2. Fill the tank: Pour the liquid into your atomizer.
3. Prime the coil: If it's a new coil, let it soak for 5-10 minutes before firing to avoid burning the cotton.
4. Start low: Set your mod to a lower wattage than usual for the first few puffs.
5. Ramp up: Gradually increase the power until you find the sweet spot where the flavor pops and the clouds are dense.
6. Monitor viscosity: If you get dry hits, the 80VG might be too thick for your current coil; open the airflow or lower the watts.

Phase 4: Closing, maintenance and learnings

Once you have finished your session or filled your tank, make sure to close the bottle tightly. Nicotine oxidizes when exposed to air and light, turning the liquid dark and peppery. Store your mixed bottle in a cool, dark place (like a drawer) to preserve the flavor intensity.

Take note of the throat hit. Since this is 10mg mixed into a larger bottle (usually resulting in 1.5mg or 3mg total strength), it should be very smooth. If you need more of a "kick" next time, you might need a higher concentration nicokit or a different PG/VG ratio.

Advantages of following this flow instead of improvising

• Consistent Flavor: Proper shaking and settling prevents "hot spots" of nicotine.
• Coil Longevity: Priming correctly with high VG liquids saves you money on replacement coils.
• Leak Prevention: Ensuring the nozzles are clicked back in prevents pocket disasters.
• Total Control: You know exactly what strength and density you are vaping.

Frequently Asked Questions

What happens if I use this 80VG nicokit in a small pod device?

It is not recommended. High VG liquids are thick and viscous. Small pods with tiny wicking holes may not absorb the liquid fast enough, leading to dry hits and burnt coils. Stick to sub-ohm devices for 80VG.

Does the 10mg strength mean I will vape at 10mg?

No. The nicokit itself is 10mg/ml. When you mix this 10ml bottle into a 50ml shortfill (0mg), the final result is 60ml of liquid with approximately 1.5mg to 1.7mg of nicotine. It is a very mild strength.

Why choose 80VG over 50/50?

You choose 80VG when you want massive vapor clouds and a very smooth sensation in your throat. 50/50 is better for flavor intensity and a stronger throat hit, but produces less vapor.

Personal Experience of Pevgrow’s CEO (Alan)

I've always been a fan of high VG liquids because I love the visual aspect of vaping—big, dense clouds are just satisfying to me. When I use the Vap Fip 80VG nicokit, I make sure to use my larger mods. In the beginning, I made the mistake of trying to use these thick boosters in my stealthy little pod system when I went out for dinner, and I ended up burning the coil in ten minutes.

Now, I have a strict rule: this 80VG nicokit is exclusively for my home setup with a dripper or a sub-ohm tank. The 10mg concentration is perfect for me because when diluted, it leaves just a hint of nicotine that calms the craving without scratching my throat, allowing me to enjoy the flavor for hours.