Voopoo PnP-VM5 0.2 Ohm Coils – DTL Mesh Replacement (5 Pack) · Massive Flavor & Clouds

The Voopoo PnP-VM5 0.2 ohm Coils (5pcs) are premium mesh replacement heads designed to instantly upgrade your Direct-To-Lung vaping sessions with explosive flavor and massive cloud production. By utilizing advanced mesh heating technology and high-quality organic cotton, these coils guarantee a rapid, even burn that transforms your best vape flavors into thick, satisfying vapor without the dreaded dry hits.

Getting a new pack of sub-ohm coils often comes with the nagging fear of burning them out on the very first day or not dialing in the right wattage to get that perfect hit. It is incredibly frustrating to load up your favorite premium e-juice, take a massive drag, and immediately taste scorched cotton because you misjudged the settings or did not prime it correctly.

That fear of ruining a fresh coil makes you play it too safe. You end up vaping at the lowest possible wattage, barely getting any flavor, or you stick to the same boring settings without ever experiencing the true potential of your device. You leave the real cloud-chasing to the pros while your high-end mod and fresh 18650 batteries sit there underutilized, delivering a mediocre experience that barely scratches your vaping itch.

The Voopoo PnP-VM5 0.2 ohm coils are built to be your ultimate learning tool, designed with a forgiving mesh structure that makes finding your sweet spot easier than ever. By treating your first few tanks as a simple trial-and-error playground, you will quickly master the 40W to 60W range, shortening your learning curve and unlocking the dense, flavorful clouds you actually paid for.

What you can expect the first few times

When you first pop one of these PnP-VM5 coils into your pod, the initial draws might feel a bit airy or overwhelmingly powerful if you are used to higher resistance coils. This is completely normal for a 0.2 ohm DTL setup. The mesh element heats up incredibly fast, meaning the vapor production will be instant and thick right off the bat.

During the first tank, you might also notice the flavor profile of your e-liquid shifting slightly as the organic cotton breaks in. Do not panic if the first three puffs taste a little cottony; this fades rapidly, giving way to the pure, unadulterated notes of your juice.

Pay close attention to the warmth of the vapor and the airflow. These are your best indicators of whether you are hitting it right. If the vapor feels too hot, your wattage might be creeping too high or your airflow is too restricted. Learning to balance these two elements is the secret to mastering these coils.

Typical mistakes and how to avoid or fix them

• Skipping the priming process: Firing the coil dry will instantly burn the cotton. Always drip a few drops of e-liquid directly onto the exposed cotton ports before installing it.
• Vaping immediately after filling: The cotton needs time to soak. Let the pod sit for 5 to 10 minutes after filling to ensure complete saturation and avoid dry hits.
• Starting at maximum wattage: Blasting the coil at 60W right away can shock the mesh. Start at 40W and gradually increase by 2W increments until you find your ideal warmth.
• Using thin e-liquids: These coils have large wicking ports. Using 50/50 PG/VG juices can cause leaks. Stick to 70% VG or higher for the best performance.
• Closing the airflow completely: DTL coils need air to stay cool. Keep your airflow at least halfway open to prevent the coil from overheating and burning out prematurely.
• Chain vaping without pauses: Taking back-to-back hits does not give the cotton time to re-saturate. Leave 10 to 15 seconds between long drags to extend the coil lifespan.

How to fine-tune until you find your perfect sweet spot

1. Start with a fresh coil, properly primed, and a full tank of your favorite 70% VG e-liquid.
2. Set your device to exactly 40W, which is the minimum recommended wattage for the PnP-VM5.
3. Open your airflow all the way and take a standard 3-second draw, noting the flavor intensity and vapor temperature.
4. Increase the power by 2W to 3W and take another draw. Change only the wattage, keeping the airflow wide open.
5. Take mental notes on how the flavor notes pop at different temperatures. Some fruity flavors shine at 45W, while desserts might need 55W to fully develop.
6. Once you find the wattage that tastes best, start closing the airflow slightly to increase the throat hit and warmth.
7. Stop adjusting when you hit that perfect balance of dense clouds, rich flavor, and a comfortable temperature.

Advantages and benefits of treating it as a learning process

• Total control over your vape: Because you understand how wattage and airflow interact, you can customize every single puff to your exact liking, which means a vastly superior vaping experience.
• Extended coil lifespan: By learning to prime correctly and ramp up the wattage slowly, you prevent accidental burns, which means you save money by making each 5-pack last much longer.
• Enhanced flavor discovery: Experimenting with different settings allows you to unlock hidden flavor notes in your e-liquids that you would never taste if you just left the mod at a default setting.
• Zero frustration: Knowing exactly how to fix a gurgling pod or a dry hit gives you the confidence to vape anywhere without worrying about your device failing on you.
• Seamless device transitions: The skills you learn dialing in these coils will make it incredibly easy to upgrade to other advanced Refillable Vapes in the future.

Frequently Asked Questions

How long does it take to really get how to use the PnP-VM5 coils?

Honestly, it only takes about one or two coils to fully understand their behavior. Once you get the hang of priming them and finding your preferred wattage within the 40W to 60W range, it becomes second nature.

How do I know if I am using the coil correctly?

You will know you have nailed it when every draw is smooth, the vapor is dense but not uncomfortably hot, and the flavor is crisp without any burnt or metallic aftertaste. If it gurgles or tastes dry, you need to adjust your technique.

What should I do if I do not like the result at 60W?

Simply dial it back! The 40W to 60W range is a recommendation, not a strict rule. If 60W is too hot or mutes your flavor, drop it down to 45W or 50W. Vaping is highly subjective, so trust your own taste buds over the numbers on the screen.

Can I use these coils with nicotine salts?

It is highly discouraged. The 0.2 ohm resistance and high wattage output will vaporize too much nicotine at once, leading to a harsh and unpleasant experience. Stick to standard freebase e-liquids, ideally at 3mg or 6mg nicotine strength.

Personal Experience of Pevgrow’s CEO (Alan)

When I first got my hands on the Voopoo Drag series, I have to admit, I burned through my first two PnP-VM5 coils in record time. I was so eager to see those massive clouds that I completely ignored the priming process and cranked the mod straight to 60W. The result? A mouthful of burnt cotton that ruined my favorite mango e-liquid. It was a classic rookie mistake, but it forced me to slow down and actually learn how the mesh technology behaves.

The game-changer for me was patience. I started letting the pod sit for a full 10 minutes after filling, and I began breaking the coil in at 35W before slowly pushing it up to my current sweet spot of 52W. At that exact wattage, with the airflow about 80% open, the flavor is absolutely phenomenal, and the coils easily last me a couple of weeks. It taught me that a little bit of trial and error at the beginning pays off massively in the long run.