Volcano Vaporizer – Easy Valve Filling Chamber Housing (Plastic Only)

You are looking at the Volcano Vaporizer Easy Valve Filling Chamber Housing, the specific spare part you need to bring your favorite desktop vaporizer back to life. If the plastic body of your chamber has cracked, warped from years of use, or simply vanished, this is the exact piece to replace it without having to spend money on a completely new kit.

Is your Volcano gathering dust because of a broken part?

There is nothing more frustrating than having the best vaporizer on the market, some top-quality herbs, and not being able to start a session because the plastic housing of the filling chamber is broken. You try to hold it together, but the air escapes, the balloon doesn't fill properly, and you end up wasting your material.

Ignoring this problem usually leads to clumsy makeshift fixes with tape or holding it down by hand, which is not only uncomfortable but can also be dangerous due to the high temperatures. In the end, you leave your Volcano in the closet and go back to combustion, losing all the purity and flavor you love.

The solution is simple, cheap, and immediate. With this replacement housing for the Easy Valve system, you can transfer your internal metal parts (which usually last forever) to this new casing. In a matter of minutes, your Volcano Vaporizer will be looking and working like day one.

Resurrect your Easy Valve in seconds

This product is designed specifically for the Easy Valve system. It consists of the two plastic sections (top and bottom) that make up the body of the filling chamber. It is the smart choice for the veteran vaper who knows how to take care of their gear: why buy the whole mechanism if the metal parts are fine?

By simply swapping the internal components, you restore the airtight seal necessary for the balloon to fill with dense, delicious vapor.

Key features and benefits in a nutshell

• High thermal resistance: Made with high-quality heat-resistant plastic, ensuring no plastic taste interferes with your herbs.
• Perfect fit: Designed exclusively for the Easy Valve system, guaranteeing an airtight seal so no vapor escapes.
• Cost-effective: Allows you to repair your setup by buying only the plastic shell, saving you money compared to buying a full chamber.
• Ergonomic design: Identical to the original, maintaining that ease of use that characterizes Storz & Bickel products.

How to assemble your new housing

Don't worry, you don't need an engineering degree to switch this out. It is designed to be intuitive. Here is how to do it:

1. Disassemble the old chamber: Carefully open your broken housing and remove the internal metal cylinder, the clips, and the screens.
2. Clean the parts: Since you have it open, take the opportunity to clean the metal parts with alcohol to remove any resin buildup.
3. Insert into the new housing: Place the metal cylinder and screens into the new plastic housing in the same order they were in the old one.
4. Snap it shut: Press the two parts of the plastic housing together until they click firmly. You are ready to vape!

Frequently Asked Questions

Does this product include the screens and metal cylinder?

No. This product is only the plastic housing (the external shell). You must reuse the internal metal parts, clips, and screens from your old chamber.

Is it compatible with the Solid Valve system?

No, this housing is exclusively for the Easy Valve system. The Solid Valve has a different construction and they are not interchangeable.

Can I use it with the Volcano Hybrid?

Yes, but only if you are using the Easy Valve adapter or reducer designed for the Hybrid. It is natively designed for the Classic and Digit models with Easy Valve.

How often should I change this part?

The plastic is very durable, but over time and with constant heating/cooling cycles, it can become brittle. If you see cracks or it doesn't close tightly, it's time for a replacement from our parts and accessories for vaporizers section.

Personal Experience of Pevgrow’s CEO (Alan)

I've been using the Volcano for over a decade, and honestly, the Easy Valve system is my favorite for its convenience. However, I've dropped the filling chamber on the floor more times than I'd like to admit. The first time it cracked, I thought I had to buy the expensive full kit again.

Discovering that I could just buy this plastic housing was a lifesaver for my wallet. It takes literally two minutes to swap the internals, and the seal is perfect again. I always recommend keeping one of these spares in your drawer; it's a very small investment that saves your weekend if you have a clumsy accident.