This grey growing tray is perfect for crops in soil or hydroponics as it's prepared to collect the excess of water from irrigation.
With this tray you will be able to reuse the irrigation water thanks to its drainage and its deep grooves, you will only have to set it up making a little slope placing a tank to collect the water under it.
You can make your own structure to suspend the tray or may use the supports we publish in our catalogue.
You also may reuse the wasted water if you have another crop in ground with other plants in the garden, in the other hand if you grow in hydroponics you may use it for further irrigations just by insalling a water pump into the tank, making this water recirculate.
Add to this some slabs to place on the top of the growing tray in order to start a new experience in the Hydro world.
An accessory that will fit on your crop very well is the drainage filter, on one hand you avoid that the water gets dirty, and on the other hand you make better use of the space since you can put a flowerpot on top.
Another good complement is the irrigation blanket, putting it under the slabs will reduce the chances of a fungi or algae attack.
Important data to evaluate before starting a hydro cultivation:
There are coconut slabs or rock wool slabs, both work very well although you should keep in mind that if you use coconut slabs you will not be able to recirculate the irrigation water, since they release debris and may obstruct the irrigation system.
These grey growing trays are not designed to be watered by flooding because the irrigation water stays in the slots and does not reach the roots. If you want to water in this way then I recommend you to take a look at these Garland trays.