Refillable Pod eGo AIO Eco-Friendly Joyetech – 1700mAh Kit

The Refillable Pod eGo AIO Eco-Friendly Joyetech is not just a vaping device; it is the sustainable reinvention of the world's best-selling kit. This All-In-One (AIO) device combines the legendary reliability of Joyetech with an upgraded 1700mAh battery and packaging designed to reduce waste. If you are looking for a robust, leak-proof electronic cigarette that offers great flavor without complications, this is the definitive choice that also helps reforest the planet.

Is this the right vape for you? (PAS)

Problem: Are you tired of buying vaping kits that require an engineering degree to assemble, or dealing with devices that leak liquid in your pocket and leave you stranded with no battery halfway through the day?

Agitation: There is nothing more frustrating than wanting to quit smoking or enjoy your vape and finding yourself with burnt coils, confusing menus, or a battery that dies in two hours. These bad experiences make many people go back to tobacco or spend a fortune on disposable vapes that harm the environment.

Solution: The eGo AIO Eco-Friendly solves all this at once. Its "All-In-One" design integrates the tank and battery into a single unibody piece, eliminating leaks and complexity. You just fill, press, and vape. Plus, with its improved autonomy and eco-conscious philosophy, you vape better while caring for the planet.

Phase 1: Preparing the ground

Before you start vaping like a pro, it is crucial to have everything ready to ensure the best experience and extend the life of your coil. This kit is minimalism at its finest, but a few checks are necessary.

• Check the coil: The kit includes a BF SS316 coil (usually 0.6ohm). Make sure you have it on hand.
• Choose your liquid: For this device, Eliquid / Best Vape Flavors with a 50PG/50VG ratio are ideal, offering the perfect balance between flavor and vapor.
• Prime the coil: This is vital. Apply 5 drops of liquid directly into the center of the coil before installing it to prevent it from burning on the first puff.

Phase 2: Setting up the product

The eGo AIO is famous for its ingenious design. Here is how to get it ready in seconds without making a mess.

1. Open the Top Cap: The cap has a child-proof lock. You must press down and turn counter-clockwise simultaneously (like a medicine bottle).
2. Install the Coil: Screw the primed coil onto the bottom of the cap (the chimney) until it is finger-tight.
3. Fill the Tank: Pour your liquid directly into the tank. Important: Do not exceed the mark that says "MAX". If you overfill it, when you insert the coil, the liquid will overflow (Archimedes' principle!).
4. Close it up: Insert the cap with the coil back into the tank. Press down and turn clockwise to seal it.

Phase 3: Use step by step

1. Turn it on: Press the fire button 5 times quickly. The LED light will flash, indicating it is ready.
2. Adjust the Airflow: Rotate the upper ring. When the two small dots align, the airflow is maximum (more vapor). Turn it 90 degrees to restrict the air (tighter draw, similar to a cigarette).
3. Vape: Press the button and inhale. The 1700mAh battery delivers constant power, so just enjoy the flavor.
4. Change LED color: With the device off, hold the fire button for a few seconds to switch between 7 colors (Red, Yellow, Green, Blue, Indigo, White, Purple) or turn the light off.
5. Monitor the battery: If the light flashes very quickly after a puff, it is time to recharge via the USB port.

Phase 4: Closing, maintenance and learnings

To keep your eGo AIO Eco-Friendly working like day one, simple maintenance is key. When you notice the flavor intensity dropping or a slight burnt taste, it is time to replace the coil. You can find replacements in our Vape Coils section.

If you are not going to use it for a few days, it is better to leave the tank empty and clean it with a paper towel. This prevents the liquid from oxidizing or clogging the air chimney. A well-cared-for eGo AIO can last you for years.

Advantages of following this flow instead of improvising

• Zero Leaks: By respecting the "MAX" line and the closing method, you ensure your pocket stays dry.
• Longer Coil Life: Priming the coil prevents that horrible "dry hit" taste.
• Better Flavor: Adjusting the airflow allows you to find the "sweet spot" for your specific liquid.
• Total Control: Knowing the light codes helps you never run out of battery unexpectedly.

Frequently Asked Questions

What is the difference between this Eco-Friendly version and the normal one?

The main difference is the 1700mAh battery (vs 1500mAh in the standard) which gives you more autonomy. Also, the packaging is minimalist and made of recycled materials, and Joyetech donates to One Tree Planted for every unit sold.

Why does my eGo AIO gurgle when I inhale?

This usually happens if the coil is flooded. Shake the device downwards (like a thermometer) to expel excess liquid from the chimney, or blow softly through the mouthpiece while pressing a paper towel against the air intakes.

Can I use nicotine salts with this device?

Yes, the eGo AIO is excellent for nicotine salts, especially if you use the 0.6ohm or 1.0ohm coils and close the airflow slightly for a mouth-to-lung (MTL) hit.

Where can I find more pods like this?

If you love this style of vaping, check out our category of Refillable Pods to see more options from top brands.

Personal Experience of Pevgrow’s CEO (Alan)

I have tried hundreds of vapes, but the eGo AIO is the one I always recommend to friends who want to start without headaches. This Eco-Friendly version is a great update; that extra battery life is noticeable when you're out all day. I organize my "phases" simply: I always carry a spare coil in the car and fill it just before leaving home.

A mistake I made at the beginning was filling it to the brim; I learned the hard way that the "MAX" line is there for a reason. Once you respect that, it is an indestructible tank. I love that it supports the reforestation cause; it makes the vapor taste even better knowing you're helping plant a tree.