Voopoo Drag 4 Kit – Refillable Pod with UFORCE-L Tank & 177W Power

The Voopoo Drag 4 Kit is the definitive evolution of the legendary Drag series, a high-performance device designed to offer you massive clouds, zero leaks, and a premium finish that feels like a luxury accessory in your hand. If you are looking for a mod that combines raw power (up to 177W) with the elegance of natural wood or resin, this is the equipment that will make you stand out.

Is this advanced kit right for you?

Problem: You want to upgrade to a pro mod, but you're afraid of buying a device that is too complicated to configure, leaks liquid into your pocket, or leaves you stranded without battery in the middle of the afternoon. The feeling of not knowing which mode to use or burning a coil prematurely is frustrating.

Agitation: There is nothing worse than investing in a good vape and having it end up in a drawer because it spills liquid or the menus are a headache. Poor management of power or airflow not only ruins the flavor of your e-liquid but also wastes your money on coils and batteries.

Solution: The Voopoo Drag 4 solves all this with its GENE.TT 2.0 chip (which manages everything for you) and the new UFORCE-L tank with top airflow, physically preventing leaks. Below, I explain how to master it in 4 simple phases so you can enjoy it from minute one without complications.

Phase 1: Preparing the ground

Before you start blowing clouds, you need to make sure you have everything ready. This is a mod with external batteries, so preparation is key to safety and performance.

• Check the energy: You need two 18650 batteries (not included). Make sure the wraps are in perfect condition and fully charged.
• Choose the coil: The kit comes with two PnP coils (TW20 and TW15). If you want more vapor, use the lower ohm one (0.15Ω); for more flavor and less consumption, the 0.20Ω one.
• Have your liquid ready: For this type of sub-ohm device, high VG liquids (70VG/30PG) are ideal to avoid leaks and generate good density.

Phase 2: Setting up the product

Once you have the materials, assembling the Drag 4 is a ritual of quality. The magnetic cover makes the process very satisfying.

1. Insert the batteries: Slide the "C" shaped magnetic cover (wood/resin) and place the 18650 batteries respecting the polarity indicated inside.
2. Prime the coil: Before installing it, put a few drops of liquid directly into the cotton holes of the PnP coil. This prevents the dreaded "burnt hit".
3. Install the coil: Press the coil into the base of the UFORCE-L tank. It is a "Push and Pull" system, no screwing required.
4. Fill the tank: Unscrew the top cap of the atomizer and fill through the silicone slots (never the central chimney).
5. Wait 5 minutes: Let the cotton soak well before turning it on.

Phase 3: Use step by step

Now comes the best part. The VOOPOO interface is intuitive, but here is the flow to get the most out of it.

1. Turn on: Press the fire button 5 times quickly. The screen will light up.
2. Select the mode: Press the up/down buttons simultaneously to enter the menu. I recommend SMART Mode to start; it automatically detects the coil and limits the power so you don't burn it.
3. Adjust the airflow: Turn the top ring of the tank. Open it fully for huge clouds or close it slightly for warmer, more intense vapor.
4. Vape: Press the button and inhale. You will notice the instant firing speed.
5. QS Lock: Use the physical switch under the screen to lock the device, turn it on/off, or lock the wattage without navigating menus. Customize this in settings.

Phase 4: Closing, maintenance and learnings

To keep your Drag 4 looking like the first day, simple maintenance is enough. If you are not going to use it for several days, remove the batteries and empty the tank to prevent the liquid from oxidizing the coil.

Clean the condensation from the base of the atomizer with a paper towel occasionally. Although the UFORCE-L is very clean thanks to the top air intake, keeping the contacts dry ensures that the electronics read the ohm value perfectly.

Advantages of following this flow instead of improvising

• Zero leaks: By filling and closing correctly, the top airflow system guarantees dry pockets.
• Longer coil life: By using SMART mode and priming correctly, your PnP coils will last twice as long.
• Battery saving: If you use the ECO mode (activatable in the menu), you can extend usage time by 10% when the battery drops below 20%.
• Total control: You will understand how wattage affects flavor and temperature, mastering your experience.

Why buy the Voopoo Drag 4? (FAB Analysis)

• Feature: UFORCE-L Tank with 3 top air inlets.
• Advantage: Balances the airflow pressure and prevents condensation from going down.
• Benefit: You enjoy a smooth, silent draw and the peace of mind that it won't leak liquid on your clothes.

• Feature: Solid wood or resin finish.
• Advantage: Each device has a unique pattern and offers a warm, non-slip grip.
• Benefit: You feel like you have a unique, premium, and durable piece in your hand, not a plastic toy.

• Feature: Multi-function QS Lock Switch.
• Advantage: Allows you to lock the wattage or the device with a physical click.
• Benefit: Comfort and speed; forget about accidental keystrokes in your pocket without having to turn off the vape completely.

Frequently Asked Questions

Does the kit include batteries?

No, the Voopoo Drag 4 requires two 18650 batteries which are sold separately. We recommend buying high-quality batteries to ensure stable performance at high wattages.

What coils is it compatible with?

It is compatible with the entire PnP coil platform (PnP-TW, PnP-VM, etc.). This gives you enormous versatility to try different vaping styles, although it is optimized for the new PnP-TW which last longer.

Why does my Drag 4 ask me for the time?

The GENE.TT 2.0 chip is so advanced that it keeps track of your puffs. Setting the time allows you to monitor your daily consumption habits accurately.

Is the UFORCE-L tank compatible with other mods?

Yes, as long as they have a 510 thread connection, which is the standard for most vape tanks on the market. However, it looks and works best with the Drag 4.

Personal Experience of Pevgrow’s CEO (Alan)

I have tried all the Drags since the first one, and the 4 is my favorite for one reason: the QS Lock switch. It seems like a detail, but being able to lock the buttons so the power doesn't move in my pocket, without having to turn off the device, is a huge comfort. I usually use it with the 0.2Ω coil at about 50W with the air halfway open; the flavor it gives with fruity liquids is brutal.

Another thing I appreciate is the wood finish. In a market full of cold metal and plastic, the touch of the wood feels warm and improves the grip significantly. It is a robust device; you can tell it is made to last.