Flowermate Aura Vaporizer · Portable Pen for Herbs & Concentrates

The Flowermate Aura is the definitive portable vaporizer if you are looking for versatility, discretion, and total control over your sessions without spending a fortune. It allows you to switch between dry herbs and concentrates in seconds, guaranteeing pure vapor thanks to its isolated air path and ceramic chamber.

Is your vaping session falling short of expectations?

There is nothing more frustrating than buying a new device and feeling like you aren't getting the performance you were promised. You pack the bowl, turn it on, and... weak clouds, uneven flavor, or worse, you end up combusting your material because you didn't know how to dial it in. You start wondering if the device is broken or if you just wasted your money.

The reality is that vaporizers are precision instruments. If you don't grind your herb correctly, pack it too tight, or pick the wrong temperature, you are literally throwing your terpenes and cannabinoids into the trash. That feeling that "it doesn't work" is usually just a lack of a clear process.

The Flowermate Aura is designed to be intuitive, but to turn it into a cloud machine, you need a method. Below, I present the step-by-step flow to master this device from the very first puff, ensuring you get the most out of your Weed Vaporizers collection.

Phase 1: Preparing the ground

Before you even turn the Aura on, the secret to a great session lies in the preparation of your material. This device uses conduction heating, which means surface area is key.

• Check the battery: Ensure your Aura has enough charge (it takes about 2 hours to fully charge via USB).
• Grind it fine: Use a quality Custom Grinder to get a medium-fine consistency. Fluffy herb vaporizes better than chunks.
• Choose your medium: Decide if you are vaping dry herb or concentrates. The Aura comes with specific pods for each.
• Cleanliness check: Make sure the mouthpiece and screens are free of residue from the last session to avoid bad flavors.

Phase 2: Setting up the product

Now that your material is ready, let's get the Aura ready for action. This setup ensures the air path is clear and the oven is hot.

1. Remove the mouthpiece: Twist it off gently to reveal the ceramic heating chamber.
2. Load the chamber: You can pack herb directly into the ceramic chamber (don't pack it too tight, airflow is life!) or use the stainless steel dosing pod for a cleaner experience.
3. For Concentrates: If you are using wax or oil, always use the Liquid/Wax pod with the organic cotton inside. Never put concentrates directly on the ceramic.
4. Power on: Press the power button 5 times quickly (within 2 seconds) to turn it on. The digital display will light up.
5. Set the temp: Use the + and - buttons to select your target temperature. For herbs, start around 190°C (375°F).

Phase 3: Use step by step

Here is how to actually vape like a pro. The Aura heats up fast (under a minute), so be ready.

1. Wait for the icon: When the steam symbol on the display stops flashing and becomes solid, it has reached the temperature.
2. The first draw: Take a slow, long inhale (about 10 seconds). Don't pull hard like a pipe; sip it like hot tea.
3. Flavor savoring: The first couple of hits will be the most flavorful (terpenes). Enjoy them.
4. Boost the heat: As the vapor thins out, increase the temperature by 10 degrees to extract the remaining cannabinoids.
5. Check the flow: If it feels clogged, you likely packed it too tight. Stir the bowl gently if needed.
6. End of session: You'll know it's done when the herb tastes like roasted popcorn and produces no more visible vapor.

Phase 4: Closing, maintenance and learnings

Once you are high and happy, don't just throw the vape in a drawer. A little care now saves you a headache later. Turn the device off with 5 clicks. While the chamber is still warm (not hot), empty the spent herb (AVB - Already Vaped Bud). It comes out much easier when warm.

Use the included cleaning brush to sweep out the chamber and the screens. If you used the concentrate pod, soak it in isopropyl alcohol if it's sticky. Note down which temperature gave you the best results for that specific strain so you can replicate it next time.

Advantages of following this flow instead of improvising

• Consistent Clouds: You won't wonder why one session was great and the next was weak.
• Better Flavor: Proper packing prevents combustion and charring.
• Device Longevity: Cleaning it warm prevents resin buildup that kills airflow over time.
• Efficiency: You stretch your stash further by extracting every bit of goodness.

Frequently Asked Questions

How long does the battery last?

The Flowermate Aura features a 2600mAh battery, which typically provides about 2 hours of continuous use, depending on the temperature settings. That's plenty for a day out.

Can I use e-liquids in the Aura?

No, the Aura is designed for dry herbs and thick waxy concentrates/oils. It is not designed for runny e-liquids like those used in a standard e-cig.

Why is the mouthpiece getting hot?

This is common in compact vaporizers. If you are doing back-to-back sessions at high temperatures, the unit can get warm. Let it cool down for a minute between sessions.

How do I switch between Fahrenheit and Celsius?

Hold the + and - buttons simultaneously for 3 seconds to toggle the temperature display format.

Personal Experience of Pevgrow’s CEO (Alan)

I've used a lot of portable vapes, and the Aura has a special place in my travel kit because of its ruggedness. I organize my "phases" by pre-filling the dosing capsules at home. This way, when I'm out hiking or at a concert, I don't have to mess around with loose herb and wind. I just pop a fresh capsule in, and I'm ready to go.

A mistake I made early on was grinding the herb too fine, almost like powder. This clogged the screen instantly and made the draw resistance terrible. Once I switched to a medium fluffier grind and stopped packing it down so hard, the airflow opened up completely, and the clouds got way denser. It's a little workhorse if you treat it right.