Easy2grow XL Extension Module – AutoPot Gravity Watering System · 2x15L Pots

The Easy2grow XL is an extension module for your AutoPot watering system that includes two 15-liter pots and a custom tray with an AQUAvalve, designed to completely automate your irrigation while keeping your grow space impeccably clean and organized.

Let’s be real, manual watering or dealing with traditional active systems usually turns your grow tent into a chaotic mess. You’ve got water spills on the floor, a tangled web of cables, noisy water pumps, and timers that always seem to fail when you need them most.

All that clutter doesn't just look bad; it steals your precious time and skyrockets your stress levels. Tripping over hoses, cleaning up muddy runoff, and constantly worrying if your plants are getting the right amount of nutrients makes the growing experience feel like a chore rather than a passion. Plus, one electrical failure and your whole crop could be ruined.

Enter the Easy2grow XL extension module. This gravity-fed genius is the ultimate way to organize your space and simplify your setup. By ditching the electronics and relying on the smart AQUAvalve, you keep everything under control, perfectly watered, and completely hazard-free.

How your grow space transforms once you add the Easy2grow XL

Before installing this module, your floor was probably a hazard zone of wires and puddles. After plugging in the Easy2grow XL, the visual and practical upgrade is instant. You get a sleek, streamlined layout where everything flows naturally.

With no pumps or timers required, the silence in your room is golden. You’ll notice a massive reduction in clutter, giving you more room to maneuver, prune, and admire your ladies without knocking over a rogue watering can.

What you can organize and optimize with this module

This isn't just about watering; it's about taking full control of your Indoor Grow layout. Here is what you can easily manage:

• Plant spacing: Perfectly align two large plants per tray for optimal light penetration.
• Nutrient delivery: Keep your feeding schedule centralized from a single reservoir.
• Root zones: The 15-liter pots provide ample, structured space for massive root development.
• Water lines: Route a single, clean 9mm pipe instead of a spiderweb of drippers.
• Runoff management: Zero runoff means no more messy saucers or wet floors to mop up.

Steps to build your organized, automated setup

1. Review what you already have: Make sure your main reservoir and existing AutoPot lines are clean and ready.
2. Group everything by type: Gather your substrate, the two 15L pots, the tray, and the AQUAvalve.
3. Arrange it using the product: Place the tray in your desired spot and insert the AQUAvalve into the center cavity.
4. Connect the lines: Hook up the 9mm tubing to your existing system or reservoir.
5. Adjust position and safety: Ensure the tray is on a flat, level surface so gravity can do its magic.
6. Do a quick check: Turn on the tap, watch the AQUAvalve fill the tray, and enjoy the automated flow.

Advantages and benefits of having everything in its place

• Fewer losses: No more overwatering or underwatering thanks to the AQUAvalve's wet/dry cycle.
• Less time spent looking for things: A clean tent means your pruning shears and nutrients are always right where you left them.
• More organized sessions: Spend your time enjoying the grow, not fighting with tangled hoses.
• Zero electricity costs: Gravity does 100% of the work, saving you money and eliminating electrical hazards.
• Fewer mistakes: The automated system removes human error from your daily watering routine.

Frequently Asked Questions

How much substrate does the Easy2grow XL hold?

This extension module comes with two 15-liter pots, giving you a total capacity of 30 liters of substrate. It's perfect for growing medium to large plants with massive root systems.

Where should I place the tray?

Always place the tray on a completely flat and level surface. This ensures the AQUAvalve functions correctly and distributes water evenly to both pots.

How do I combine it with my current AutoPot system?

It’s super easy! Just use a standard T-connector or X-connector to link the 9mm pipe of this extension directly into your existing main water line or reservoir.

How do I clean and maintain the AQUAvalve?

Between grows, simply remove the AQUAvalve, wash it with warm soapy water, and use a small brush to clear any salt buildup. Keeping it clean guarantees a flawless wet/dry cycle for your next batch.

Personal Experience of Pevgrow’s CEO (Alan)

When I first started expanding my indoor grow, I dreaded adding more pots because it usually meant more cables, more drippers, and a lot more mess. Adding the Easy2grow XL to my setup was a game-changer. It allowed me to scale up my canopy without adding a single wire or pump to the room. The peace of mind of knowing the AQUAvalve is handling the watering while I’m away for the weekend is priceless.

My personal organization trick? I always elevate my main reservoir about 20 cm higher than recommended and run the tubing along the edges of my Grow tents using zip ties. This keeps the floor 100% clear for sweeping and prevents any accidental tripping when I'm checking on the girls. If you want a stress-free, high-yielding garden, this is the way to go.