Ventilation tubes

In this section you will find the ventilation tubes and all the necessary components to manufacture your own ventilation system for your indoor cultivation. We are going to give you a series of basic tips to make the manufacture of your ventilation system easier.

In the first place, the fundamental element is the tube, we recommend that you acquire an aluminium tube, with which we connect the extraction system with the street, to expel the hot air and thus reduce the temperature of your indoor crop, because otherwise the plants would be subjected to an impossible temperature, which would basically burn.

In order to know which tube you should use, it will be necessary to evaluate the flow of air that we have. If it is a high flow will cause a lot of noise when performing the extraction and you must opt for a soundproofed aluminum tube such as Sonoconnect tubes. These tubes are lined with a layer of fiber, which isolates the temperature of the air and the noise it causes, preventing your neighbors more gossip, decide to stick their noses where they are not called.

When you assemble your ventilation system is of vital importance that you take into account the correct union between each and every one of the pieces, because otherwise the air will not come out properly and the ventilation will not be adequate. To do this you have aluminum adhesive tape and then if you put a flange collar, ensure the perfect union between the pieces. The collar flanges are made of galvanized steel with a neoprene coating to avoid noise vibrations.

In addition, we recommend the installation of a pollen filter, which will prevent your strains can be pollinated if there are male plants around. It is very easy to install and it will avoid you some displeasure.

You can also install a non-return valve, with which, if the extraction is switched off, no birds or insects enter. Its reliability has been proven by numerous tests, which have demonstrated its resistance to high temperatures and extreme and repeated vibrations.

At PevGrow, you can find all these elements and many more, so that you can develop your own extraction system. We have extraction tubes of all sizes, to make it easier to adapt them to your crop, as well as all the complements for your indoor crop, the perfect place for your varieties to feel as if they were growing in the Garden of Eden itself.