Adjust-a-Wings Avenger Reflector – Professional 97% Reflectivity & Super Spreader

The Adjust-a-Wings Avenger Reflector is the ultimate tool for professional growers who refuse to compromise on yield, offering an unbeatable 97% reflectivity that turns every watt of electricity into dense, resinous buds. This isn't just a piece of metal; it's a precision-engineered light management system designed to mimic the sun's footprint and eliminate the inefficiencies of traditional indoor lighting.

Are you tired of seeing your plants struggle with uneven growth and disappointing yields?

Without a high-end reflector, you are essentially throwing money away every month on your electricity bill. Standard reflectors create dangerous "hot spots" right in the center that burn your colas, while the plants on the edges stretch and starve in the shadows. You end up having to raise the lamp to avoid heat stress, which drastically reduces the lumens reaching your crop, resulting in fluffy, airy buds that lack potency.

It is frustrating to put so much effort into nutrients and genetics only to be limited by your lighting setup. Watching your plants suffer from heat stress or seeing half your grow tent under-illuminated creates anxiety and the feeling that you aren't reaching your full potential. You know your 600W or 1000W bulb has the power, but your current setup is strangling its efficiency.

The Adjust-a-Wings Avenger is the definitive solution that harmonizes your entire grow room. By using its adjustable wings and the patented Super Spreader, you can bring the light much closer to the canopy—safely—while spreading that intensity evenly across a wider footprint. It transforms a chaotic, hot environment into a perfectly lit, cool, and productive garden where every plant gets the energy it needs to explode.

Before setting up your lighting system

Before hanging this beast, you need to understand that the Avenger is not a "plug and play" reflector in the traditional sense; it requires a bit of tuning to match your space. You aren't just hanging a lamp; you are setting up a light distribution engine. Make sure your Electronic Ballasts are compatible with the wattage you intend to run (400W, 600W, or 1000W).

• Check your footprint: The Medium model is perfect for 400W or 600W bulbs, while the Large model is a monster designed for 1000W or two 600W bulbs.
• Assemble with care: The wings are held in tension by steel cables. Take your time adjusting them to the "Wide" or "Narrow" setting depending on your grow stage.
• Install the Super Spreader: This is non-negotiable. It blocks the direct heat from the arc tube, allowing you to lower the lamp significantly.
• Clean the bulb: Ensure your HPS or MH bulb is free of fingerprints before firing it up to maintain that 97% reflection efficiency.

During your grow cycle

Once your lights are on, the magic happens. In the vegetative stage, you can set the wings to a wider position to cover more area as your clones or seedlings establish themselves. Because the Avenger dissipates heat so effectively, you won't need to run your Climate Control systems as hard, keeping humidity levels more stable.

As you flip to flowering, you can adjust the wings to a slightly narrower setting to punch light deep into the canopy. The key here is the Super Spreader. It acts as a heat shield, meaning you can drop your light to within 20-30cm of the plant tops (for a 600W) without burning them. This proximity creates a massive spike in PAR (Photosynthetically Active Radiation) reaching the buds, which is exactly what triggers massive resin production.

Keep an eye on the plants at the very edges of your Grow tents. With a standard reflector, these would be weak. With the Avenger, you will notice they are developing almost as vigorously as the center plants. This uniformity is what separates a hobby harvest from a professional yield.

After: results and maintenance

When harvest time comes, the difference is undeniable. You will likely see a yield increase of up to 50% compared to basic stucco reflectors, simply because you utilized more of the light you paid for. The buds will be denser and more uniform from top to bottom.

Maintenance is where the "Avenger" model shines over the cheaper "Enforcer" or "Defender" models. It is made of vapor-coated glass on molten aluminum containing titanium. This means it does not corrode. After your cycle, simply wipe it down with a soft, damp cloth. It will maintain its 97% reflectivity for years, unlike cheaper aluminum that dulls and oxidizes after a few crops.

Short- and long-term advantages and benefits

• 97% Reflectivity: The highest on the market, meaning more lumens hit your plants, not your walls.
• Double the Power: Increases the efficiency of your lamp by up to 50% compared to standard reflectors.
• Heat Management: The Super Spreader reduces heat at the plant level by up to 5°C.
• Adjustable Footprint: You can mechanically widen or narrow the light spread to match your plant's growth stage.
• Durability: The glass-coated super-alloy is resistant to corrosion and oxidation, ensuring a long lifespan.
• Versatility: The Large model allows for a dual-lamp setup (e.g., one MH and one HPS) for a full-spectrum effect.

Frequently Asked Questions

Does the Adjust-a-Wings Avenger come with the Super Spreader?

Yes, the Avenger models (both Medium and Large) include the Super Spreader. This component is essential for achieving the maximum performance this reflector offers.

What is the difference between the Medium and Large models?

The Medium is ideal for 400W and 600W bulbs. The Large is designed for 1000W bulbs or can be adapted with a second socket (sold separately) to hold two 600W bulbs simultaneously.

How close can I put the light to my plants?

Thanks to the Super Spreader, you can place a 600W lamp as close as 25-30cm from the canopy, provided you have decent ventilation. Always do the "hand test" to be sure.

Can I use LED bulbs with this reflector?

While you can physically screw in an LED bulb with an E40 base, this reflector is specifically engineered for the 360-degree light emission of HPS and MH bulbs. LEDs are usually directional and don't benefit as much from the double-parabolic shape.

Personal Experience of Pevgrow’s CEO (Alan)

I've been in this game for a long time, and I remember when the Adjust-a-Wings first hit the scene. I was skeptical—it looked like a bird in flight—but once I swapped out my old cool tube for an Avenger, the difference was night and day. The most critical thing I learned is: trust the Spreader.

My instinct was always to keep 600W HPS lights at least 50cm away. With the Avenger and the Spreader installed, I dropped them to 30cm. I was terrified I'd burn the crop, but the heat dissipation is real. The result? Rock-hard buds even on the lower branches. If you are serious about gram-per-watt efficiency, this is the best investment you can make for your lighting setup. Just be careful with the assembly; the aluminum is high-tech and flexible, but you don't want to crease it. Treat it like the precision instrument it is.