Agrolite Class 2 Lighting Kit – Plug & Play HPS/MH System for Indoor Growing

The Agrolite Class 2 Lighting Kit is the ultimate Plug & Play solution for indoor growers who want professional results without the electrical headaches. This all-in-one system delivers the raw power of High-Pressure Sodium (HPS) or Metal Halide (MH) lighting with a pre-wired safety ballast, ensuring you can start growing massive buds minutes after unboxing.

Is setting up a high-intensity grow light dangerous or difficult?

There is a lot of confusion and fear surrounding HPS lighting systems, especially regarding the electrical connection of the ballast. Many growers, particularly beginners, feel overwhelmed by the idea of stripping wires and connecting cables, fearing they might cause a short circuit or, worse, a fire due to poor installation. This anxiety often leads people to buy inferior lighting systems just to avoid the setup.

This fear is not unfounded if you are dealing with old, cheap magnetic ballasts that require manual wiring and lack safety housing. A loose connection or an exposed wire in a humid grow room is a recipe for disaster. However, letting this fear stop you from using high-intensity discharge (HID) lighting means missing out on the massive yields that these lights are famous for.

The Agrolite Class 2 Lighting Kit is the definitive solution to this problem. It features a ballast that comes fully encapsulated and pre-wired from the factory. You don't need to be an electrician or own a screwdriver; simply connect the reflector to the ballast using the Plug & Play system, and you are ready to grow safely. This description will guide you through the myths and realities of this essential equipment.

Typical myths about HPS/MH lighting kits

• Myth: "HPS lights are obsolete compared to LED." Reality: While LEDs are efficient, HPS lights still offer the best lumen-per-dollar ratio and heat penetration for dense, heavy flowers.
• Myth: "Magnetic ballasts are dangerous fire hazards." Reality: This applies to old, open models. The Class 2 ballast in this kit is encased in fire-resistant safety plastic and is pre-wired to prevent user error.
• Myth: "You can't control the heat they generate." Reality: By choosing the Cooltube reflector option, you can extract heat directly, keeping your climate perfect.
• Myth: "All bulbs are the same." Reality: Premium bulbs like Philips or Sylvania maintain their spectrum stability longer, resulting in better harvests over time.

What this product really does (and what it doesn't)

The Agrolite Class 2 Kit provides the intense light intensity required for vigorous photosynthesis. It allows you to customize the spectrum depending on the bulb you choose (MH for growth, HPS for flowering, or Mixed for both). It acts as the engine of your grow room, driving plant metabolism to its limit to produce heavy, resinous buds.

However, it is important to understand that this is a high-performance tool. It does not cool itself; if you install it in a very small space without extraction, temperatures will rise. It is designed to work in harmony with your ventilation system to create a high-yield environment.

Advantages and benefits when used properly

• Safety First: Because the ballast is Class 2, it is fully insulated and pre-wired, eliminating the risk of electrocution or short circuits during installation.
• Plug & Play Simplicity: You save time and stress. No tools are needed to get your Grow lights running.
• Customizable Yields: Choose a Philips Son-T PIA bulb for maximum flowering density, or an Agrolite bulb for a great quality/price balance.
• Climate Control: If you select the Adjust-a-Wings reflector, you can cover a wider area (up to 1.2m²) without hot spots, mimicking natural sunlight.
• Versatility: The ETI 2 ballast is compatible with both Sodium (HPS) and Metal Halide (MH) bulbs, allowing you to use the same equipment for the entire cycle.

Tips to choose well according to your expectations

This kit is fully customizable, so your choice should depend on your grow space and goals. If you are growing in a hot area or a small tent, the Cooltube reflector is non-negotiable to keep temperatures down. If you have a large room and want to maximize the footprint of a single light, the Adjust-a-Wings is the pro choice.

• If you want the absolute highest yield, pair this kit with a Philips or Lumatek bulb.
• If you are on a budget but want safety, the standard Stucco reflector with an Agrolite bulb is a workhorse that won't let you down.
• Remember to remove the blue protective plastic from the reflector before turning it on!

Frequently Asked Questions

Is the ballast compatible with LED bulbs?

No, this ballast is designed specifically for High-Pressure Sodium (HPS) and Metal Halide (MH) discharge lamps. Do not try to connect an LED to it.

Does the kit come with cables?

Yes, that is the main advantage of the Class 2 kit. The ballast comes with the mains cable and the reflector cable already installed. It is truly Plug & Play.

Which bulb should I choose for the whole cycle?

If you don't want to change bulbs, choose a "Mixed" or "Agro" bulb (like the Agrolite or Sunmaster Dual Spectrum), which works for both vegetative growth and flowering.

How much area does the 600W kit cover?

A 600W HPS kit is the standard for covering a 1.2m x 1.2m area. For 400W, aim for 1m x 1m.

Personal Experience of Pevgrow’s CEO (Alan)

I've heard so many horror stories about "fried" ballasts and melted cables from growers who bought cheap, unassembled kits and tried to wire them up without experience. It's a risk that just isn't worth taking. When I tested the Agrolite Class 2, what struck me most was the peace of mind. You take it out of the box, hang the reflector, plug it in, and you're done.

In practice, this kit is a beast. I've used it with the Adjust-a-Wings reflector and a Philips bulb, and the results are indistinguishable from much more expensive setups. It's robust, it doesn't hum like the old magnetic blocks, and the safety casing makes it perfect for the humid environment of a grow room. If you want the density of HPS buds with the ease of a toaster, this is the one.