Daisy Umbrella Reflector Secret Jardin – +40% Light Efficiency

Get ready to squeeze every last lumen out of your bulb with the Daisy Umbrella Reflector by Secret Jardin, a piece of engineering designed to increase the light output of your crop by up to 40% while drastically reducing temperature. If you want to stop wasting energy and start seeing denser buds, this reflector is the upgrade your indoor setup is screaming for.

Is your lighting system wasting energy and stressing your plants?

We've all been there: you invest in good Grow lights, but standard reflectors create "hot spots" that burn the tips of your plants while the sides are left in the dark. It's frustrating to feel like you're not in control of the photon distribution, basically throwing money (and electricity) down the drain while risking heat stress in your grow tent.

This lack of control turns into constant worry. You have to raise the lamp too high to avoid burning the canopy, which reduces the light intensity reaching the lower branches. The result? Fluffy buds, uneven growth, and the nagging feeling that your harvest could be much better if you just had the right equipment to manage that heat and light properly.

The Daisy Umbrella Reflector is the definitive solution to regain control. Thanks to its umbrella-shaped design and advanced reflective material, it eliminates hot spots and allows you to place the light closer to the plants without burning them. It transforms your current setup into a high-performance machine, ensuring that every watt you pay for ends up converted into biomass.

More safety, less heat, total discretion

One of the biggest advantages of the Daisy is how it manages temperature, which directly translates to safety and discretion. Unlike closed hoods that trap heat and radiate it downwards, the Daisy allows heat to dissipate upwards naturally. This means your grow tent stays cooler, your extractor fans don't have to work as hard (less noise!), and your thermal signature is lower.

Its structure is incredibly lightweight (less than 1.3 kg), making it perfect for small or medium-sized grow tents where heavy equipment can be a hazard. Plus, being foldable like an umbrella, it's the ultimate stealth tool for transport and storage. You can set it up or take it down in minutes, keeping your operation low-profile and adaptable.

Control over the experience: Technical Superiority

• Unbeatable Reflection: Made with Mylar 210D fabric, offering superior reflectivity compared to classic aluminum, ensuring 40% more light reaches your plants.
• Thermal Protection: The lamp is positioned horizontally with a thermal fuse (on specific models) that cuts power if it overheats, giving you peace of mind even when you aren't home.
• Closer Placement: Because it dissipates heat so well, you can place MH Lamps or HPS bulbs closer to the canopy, increasing penetration without stress.
• Versatile Compatibility: Works with HPS, CFL, and LEC Lighting (CMH), adapting to whatever stage or style of growing you prefer.
• Three Sizes: Available in 60cm, 80cm, and 100cm to fit perfectly in tents ranging from 60x60cm to 150x150cm.

How to use it responsibly and comfortably

Assembling the Daisy is as easy as opening an umbrella—literally. Forget about screws and complex tools. Here is how to get it running smoothly:

1. Unfold the structure: Take it out of the bag and gently open it like an umbrella. Ensure the reflective side is facing down.
2. Secure the rods: Insert the rods into their designated slots. Start with opposite sides to keep the tension balanced, then fill in the rest.
3. Install the socket: Place the socket holder in the center. It fits securely to ensure the bulb stays horizontal.
4. Insert the bulb: Screw in your HPS, CFL, or CMH bulb carefully. Remember to use a clean cloth to avoid leaving oils on the glass.
5. Hang and adjust: Use your pulleys to hang it. Thanks to its heat dissipation, you can start closer to the plants (check the table below for specific distances), but always monitor the temperature at the canopy level during the first few hours.

Benefits of having everything under control

• Peace of Mind: Knowing your plants aren't roasting allows you to relax.
• Higher Yields: More light intensity + better distribution = fatter, denser flowers.
• Energy Efficiency: You get more PAR output from the same wattage.
• Flexibility: Easy to move, clean, and store between cycles.
• Safety First: The built-in thermal protection (check model specs) adds a layer of security against fire hazards.

Frequently Asked Questions

Can I use a 1000W HPS bulb with the Daisy?

No, it is not recommended. The maximum recommended power is 600W (or 750W for the largest model) to ensure the materials withstand the heat and to maintain safety standards.

How much closer can I put the light compared to a normal reflector?

You can typically reduce the distance by about 10-20 cm compared to a standard stucco reflector, thanks to the efficient heat dissipation. Always do the "hand test" to be sure.

Is it compatible with CFL bulbs?

Yes, the Daisy is excellent for CFLs (Compact Fluorescent Lights) as well, helping to direct their diffuse light exactly where it's needed.

Does it come with the cable and socket?

Yes, the Daisy Umbrella Reflector comes as a complete kit with the IEC cable and socket ready to connect to your ballast.

Personal Experience of Pevgrow’s CEO (Alan)

I've tested dozens of reflectors over the years, and the Daisy honestly surprised me. Usually, to get this kind of light spread, you have to deal with heavy, bulky air-cooled hoods. The Daisy gives you that "wing" spread but with zero weight. I use the 100cm model in my personal tent with a 600W HPS, and the difference in the lower buds is noticeable—they actually get hard instead of staying airy.

My trick? I use it to get really close during the final weeks of flowering. Since the heat escapes upwards so effectively, I can lower the lamp just a bit more than usual to really push resin production without frying the terpenes. It's a game-changer for summer growing when temps are tricky.