Pit100 Housing (100mm) – Prima Klima PitPuk System · Impact-Resistant Polyamide

The Pit100 Housing (100MM) is the backbone of the revolutionary PitPuk modular filtration system by Prima Klima, designed to give you total control over odors in your indoor grow. This isn't just a casing; it's the starting point for a customizable, lightweight, and highly efficient air purification setup that adapts to your specific needs.

Is your current odor filter heavy, rigid, and hard to manage?

Problem: Many growers struggle with traditional carbon filters that are heavy, bulky, and difficult to hang inside a grow tent. Worse yet, when the carbon is exhausted, you often have to discard the entire heavy metal unit, which is a waste of money and resources. You might be wondering if there's a way to get professional filtration without wrestling with a 20kg steel cylinder every time you need to change your setup.

Agitation: Ignoring this issue usually leads to a "here we go again" moment every harvest cycle. You strain your back trying to suspend a heavy filter, or you end up spending more on shipping costs for a new unit than on the filtration itself. Sticking to old-school, non-modular filters means you are stuck with a fixed capacity, unable to expand if your odor control needs increase during peak flowering.

Solution: The Pit100 Housing solves this by offering a modular, ultra-lightweight base for the PitPuk system. By using this housing, you only need to attach the lightweight PUK360 carbon cartridges. It allows you to build a filter that is easy to handle, easy to hang, and cost-effective in the long run because you stop paying for the metal casing over and over again.

Why the Pit100 Housing is actually worth it for you

If you are serious about your Air Extraction System, the Pit100 Housing is a game-changer. Unlike traditional metal filters, this unit is made from high-impact polyamide. This means it is incredibly tough but surprisingly light. You won't have to worry about dents affecting the airflow or the structural integrity of your ventilation setup.

The real value lies in its modularity. This housing is a one-time investment. Once you have it, you simply stack the carbon cartridges (sold separately) as needed. Whether you have a small closet grow or a larger tent, this system scales with you, ensuring you always have the right amount of filtration without the bulk.

Most important features and benefits

• High-Impact Polyamide Construction: Unlike cheap plastic or heavy steel, this material is virtually indestructible in a grow room environment, ensuring your housing lasts for years.
• 100mm Flange: Perfectly sized for standard ducting, making it compatible with most common extraction setups without needing complex reducers.
• Modular Design: Acts as the base for PUK360 cartridges, allowing you to customize the filtration capacity based on your crop's smell intensity.
• Aerodynamic Efficiency: Designed to maximize airflow through the carbon, ensuring your odor eliminator for weed works at peak performance with minimal pressure drop.
• Lightweight (660g): Reduces the load on your tent's frame bars, making it much safer and easier to install alone.

Typical objections and clear answers

It's normal to have doubts when switching from a classic steel filter to a modular system. Here is the reality:

• You think that plastic housings might crack or leak smells. In reality, the polyamide used by Prima Klima is industrial-grade, impact-resistant, and designed to create a perfect, airtight seal with the cartridges.
• You think that assembling a modular filter is complicated. In reality, the PitPuk system is designed like building blocks; the housing snaps and locks with the cartridges intuitively in seconds.
• You think that it might not fit your current extractor. In reality, if you have a 100mm (4-inch) extractor, this is a direct fit, and it often improves airflow compared to restrictive generic filters.

How to use it safely and effectively

Getting your PitPuk system running with the Pit100 Housing is straightforward. Follow these steps for the best results:

1. Preparation: Unbox the Pit100 Housing and ensure you have the necessary PUK360 activated carbon cartridges (not included with the housing).
2. Assembly: Place the housing on a flat surface and stack your PUK360 cartridge(s) onto it. Ensure the seal is tight to prevent air leaks.
3. Connection: Attach your 100mm ducting to the flange on the housing. Secure it with a clamp or duct tape to ensure it is airtight.
4. Placement: Hang the assembled unit inside your grow tent, preferably at the top where heat accumulates.
5. Check: Turn on your extractor and check for leaks around the connection points. You should feel suction through the carbon face.
6. Maintenance: The housing itself just needs a wipe down occasionally. Replace the carbon cartridges when you notice Odor Neutralizers are no longer effective (usually every 1-2 years depending on load).

Frequently Asked Questions

Is the Pit100 Housing compatible with other brands of cartridges?

No, it is specifically designed to work with the Prima Klima PUK360-3mm activated carbon cartridges to ensure a perfect seal and optimal airflow.

Does the housing come with the carbon cartridge included?

No, this product is just the housing (the top and bottom structure). You need to purchase the PUK360 cartridges separately to have a functioning filter.

Can I use this housing for inline filtration?

Yes, the PitPuk system is versatile and can be configured for inline use if you have the correct adapters, but it is primarily designed as the intake point for your extraction system.

Personal Experience of Pevgrow’s CEO (Alan)

"I've seen a lot of filtration systems come and go, but the PitPuk concept with this Pit100 Housing is one of the smartest moves Prima Klima has made. I used to hate lugging heavy steel filters up ladders or trying to strap them to the roof of a tent without dropping them on my plants. This housing is feather-light but feels incredibly solid in your hands."

"My advice? Don't underestimate the polyamide material. It handles the humidity and temperature fluctuations of a grow room much better than cheap metal that eventually rusts. If you are setting up a 100mm extraction line, this is the most versatile investment you can make. You buy the housing once, and then you're just swapping out the carbon pucks—it saves you money and back pain in the long run."