XMAX Qomo Black Vaporizer – Portable Mini E-Rig for Concentrates · Water Filtration & Ceramic Heating

The XMAX Qomo Black Vaporizer is a compact, portable e-rig designed to give you the smooth, potent experience of a water pipe with the convenience of a pocket device. Its main benefit lies in its ability to filter vapor through water in a mini-format, cooling down your concentrates to preserve flavor and protect your throat without the bulk of traditional rigs.

Is dabbing too complicated for you?

Let’s be real: traditional dabbing can be intimidating. Does the idea of carrying around a blowtorch, a fragile glass rig, and guessing the temperature of a red-hot nail stress you out? You are not alone. Many users give up on concentrates because the process feels like a dangerous science experiment that requires too much gear and space.

The consequences of this complexity are wasted material and a harsh experience. If you overheat the nail, you burn the terpenes and cough your lungs out. If it's too cold, you waste your precious extract. Plus, the lack of portability means you are stuck at home, missing out on enjoying your extracts at parties, on hikes, or simply on the couch without the risk of burning yourself.

The XMAX Qomo solves this equation by automating the entire process. It is one of the most user-friendly Concentrate vaporizers on the market. No torches, no cables, no guesswork. It offers a clear, phase-based path to the perfect dab: just fill, click, and inhale. It turns a complex ritual into a simple, enjoyable 10-second action.

Phase 1: Preparing the ground

Before you start melting your extracts, you need to ensure the device is ready to perform. Since this is an electronic rig with water filtration, a quick check prevents leaks or low battery mid-session.

• Charge fully: Use the included USB-C cable. The light will turn off when it's ready.
• Check your extract: Have your wax, shatter, or rosin ready.
• Tool check: Ensure you have your loading tool handy (one is usually included, but premium Dabbers offer better precision).
• Hygiene: Make sure the ceramic cup is clean from the previous session to ensure pure flavor.

Phase 2: Setting up the product

Setting up the Qomo is different from a standard dry herb vape because of the water component. Follow these steps carefully to avoid getting water into the electronics.

1. Remove the bubbler: Gently pull the glass bubbler upwards to detach it from the battery base.
2. Fill with water: Fill the bubbler from the top. You only need a small amount—just enough to cover the air holes (percolator). Do not overfill.
3. Test the draw: Before reattaching, inhale through the glass to check the water level. It should bubble without water reaching your mouth.
4. Dry and attach: Wipe the outside of the glass completely dry. Push it back onto the battery base until the O-rings secure it firmly.
5. Power on: Click the power button 3 times quickly to turn the device on. The LED will flash.

Phase 3: Use step by step

1. Select Temperature: Click the button 2 times to cycle through settings. White (Low/536°F) for flavor, Green (Mid/608°F) for balance, Red (High/662°F) for big clouds.
2. Load the cup: Place a small amount of concentrate (size of a grain of rice) into the ceramic cup.
3. Start Heating: Click the button once to start the automatic heating cycle. The light will breathe/pulse.
4. Pre-heat phase: The device takes about 10 seconds to reach temperature. Wait for the light to become solid.
5. Inhale: Once the light is solid, inhale gently and steadily through the glass mouthpiece.
6. Carb Cap (Optional): If your model includes a carb cap, place it over the cup and rotate it while inhaling to improve airflow and vaporization.
7. Enjoy: Take slow draws. The cycle lasts 20 seconds before auto-shutoff.
8. Stop: If you finish before the timer, click once to stop heating.

Phase 4: Closing, maintenance and learnings

Once you are done, maintenance is key for longevity. The most important rule with the Qomo is to clean the cup while it's still warm (but not burning hot). Use a cotton swab to wipe out the residue. If you let it harden, it becomes difficult to remove and will degrade the flavor of your next session.

Empty the water from the bubbler if you are planning to store it or travel. Stagnant water can get moldy, and traveling with water inside risks leaks into the battery compartment. A quick rinse with isopropyl alcohol every few weeks keeps the glass sparkling.

Advantages of following this flow instead of improvising

• Flavor Purity: Cleaning and proper temp selection ensures you taste the terpenes, not carbon.
• Device Safety: Filling the glass off the battery prevents short circuits.
• Efficiency: Pre-heating and proper loading prevents wasting expensive concentrates.
• Discretion: By mastering the flow, you can take a quick stealth hit in seconds.

Frequently Asked Questions

How long does the battery last?

The 1350mAh battery typically lasts for about 10 to 15 sessions per charge, depending on the temperature setting used. It recharges fully in under 2 hours via USB-C.

Can I use dry herbs with the XMAX Qomo?

No, the Qomo is designed strictly for extracts and concentrates (wax, shatter, rosin, crumble). Putting dry herbs in the ceramic cup will likely combust and ruin the atomizer.

Why is the light flashing red?

A flashing red light usually indicates low battery. Plug it into the charger. If it flashes while fully charged, check if the atomizer is screwed in correctly.

Is the atomizer replaceable?

Yes, the ceramic cup atomizer is a consumable part. Depending on usage and cleaning habits, it may need replacement every 1-3 months to maintain optimal flavor.

Personal Experience of Pevgrow’s CEO (Alan)

I honestly treat the XMAX Qomo as my "festival rig." When I'm at home, I might use a larger setup, but when I'm out camping or at a concert, this little guy is unbeatable. My "phase" trick is to always use the White (lowest) temperature setting first. The ceramic cup retains heat really well, so starting low gives me incredible flavor on the first hit. If I want more punch, I bump it up for the second cycle.

A mistake I made early on was overfilling the bubbler. It's tiny! You literally only need a few drops of water. I once put too much in and got a splash of water in my mouth—not pleasant. Now, I always test the draw before putting the glass back on the battery. It takes two seconds and saves the session.