Extraction Kit 150mm TT – Complete Ventilation System for Indoor Growing

If you are looking for the quickest and most effective way to professionalize your indoor crop, the 150mm Extraction Kit with TT Extractor is exactly what you need. This is not just a fan; it is a complete climate control and odor management system designed to keep your grow tent at the perfect temperature while ensuring that absolutely no smell escapes your grow room. It is the backbone of any serious setup, providing the airflow your plants crave.

Is your grow room getting too hot or too loud?

Problem: Every indoor grower faces the same nightmare: temperatures that skyrocket when the lights are on and the overwhelming, tell-tale smell of flowering cannabis that permeates the whole house. Relying on passive ventilation or weak fans just doesn't cut it, leading to heat stress for your plants and stress for you regarding privacy.

Agitation: If you don't control the environment, you risk losing your harvest to mold, pests, or heat burn. Even worse, if you don't scrub that air, the "dank" aroma becomes a beacon for nosey neighbors. Trying to piece together a ventilation system part-by-part is often confusing, expensive, and results in mismatched components that don't seal properly.

Solution: The 150mm TT Extraction Kit solves all these issues in one go. It provides a powerful air extraction system perfectly matched with a carbon filter to scrub every cubic meter of air before it leaves the tent. You get optimal climate control and stealth in a single, easy-to-install package.

Why this kit improves your indoor game

Moving from a basic setup to this professional kit is a game-changer. Unlike buying separate components that might not fit together, this kit ensures that the airflow capacity of the extractor matches the filter's scrubbing rate. This means no bottlenecks and maximum efficiency.

Furthermore, the TT extractor is a hybrid axial-centrifugal fan, meaning it moves a serious amount of air (up to 520 m3/h) without the roaring noise of industrial turbines. It gives you the stability of a professional grow room, keeping humidity in check and ensuring your plants have a constant supply of fresh CO2.

Key features you’ll notice from the very first use

• 150mm (6-inch) Diameter: The standard size for medium to large tents (up to 1.5m x 1.5m), allowing for high-volume air exchange.
• 2-Speed Motor: You can switch between lower power for the vegetative stage and full power for flowering, saving energy and reducing noise.
• High-Efficiency Carbon Filter: Acts as a powerful odor eliminator for weed, scrubbing 100% of the smell before the air is exhausted.
• 5 Meters of Aluconnect Ducting: High-quality flexible ventilation tubes that allow you to position the fan exactly where you need it without light leaks.
• Plug & Play: Comes with everything you need to set it up immediately, saving you trips to the hardware store.

Who is this extraction kit for?

This kit is the sweet spot for most home growers. It is specifically designed for:

• Intermediate Growers: If you are upgrading from a small closet to a proper grow tent (1.2m x 1.2m or similar).
• Discretion Seekers: Users who live in apartments or shared spaces where odor control is non-negotiable.
• Efficiency Lovers: People who want a matched system where the fan and filter are guaranteed to work in harmony.

How to integrate it into your routine

Setting this up is straightforward. Hang the filter at the highest point inside your grow tent (since heat rises). Connect the filter to the extractor using a piece of the ducting, and then run the rest of the ducting from the extractor to the outside of the tent.

For the best results, keep the ducting as straight as possible to maximize airflow. During the vegetative stage, run the fan on the lower speed setting to maintain humidity; once you flip to flower, switch to high speed to manage the heat and intense aromas.

Frequently Asked Questions

How often should I change the carbon filter?

Typically, the carbon filter included in these kits lasts for about 3 to 4 crops, or roughly 9-12 months of continuous use, depending on the humidity and dust levels in your grow room.

Is the fan loud?

The TT extractor is designed to be quieter than standard inline fans. However, you can reduce noise further by using insulated ducting or a fan speed controller.

Can I use this kit for a 100x100cm tent?

Absolutely. It will provide excellent negative pressure and cooling for a 1x1m tent, ensuring your plants never suffer from heat stress.

Personal Experience of Pevgrow’s CEO (Alan)

"I remember when I first started growing indoors, I tried to save money by buying a cheap bathroom fan and a generic filter. It was a disaster—the smell leaked everywhere, and my temperatures were uncontrollable. When I switched to a proper TT Extraction Kit, the difference was night and day. The peace of mind knowing that no smell is escaping is priceless. I recommend this 150mm kit for anyone running a 600W HPS or a powerful LED setup; it’s the perfect balance of power and price."

Don't let heat and smell ruin your harvest. Secure your 150mm Extraction Kit with TT Extractor today and grow with confidence!