Metal Bracket for Extractors – Anti-Vibration Support

The Metal Bracket for Extractors is the definitive upgrade your ventilation system needs to stop vibrating like an old washing machine and start running smoothly. It is a robust structure designed to secure your turbine, drastically reduce noise caused by vibrations, and give you the freedom to place the equipment wherever it suits you best, ensuring a professional and stealthy setup.

Is your extractor making more noise than it should?

We know the feeling. You buy a powerful Air extractor to keep the climate perfect, but once you turn it on, the vibration against the floor or the wall creates a humming sound that penetrates walls. It’s not just the sound of the air; it’s the rattle of the engine lacking a solid base.

If you don't fix this, you are risking two things: first, annoying your neighbors (or housemates) with a constant low-frequency noise that gives away your location. Second, an unstable extractor wears out its bearings faster, meaning you'll have to replace it sooner. Plus, leaving it loose on the floor often leads to messy ducting with sharp bends that choke your airflow.

The solution is simple and effective. This metal bracket anchors your equipment firmly. By lifting it off the ground or securing it to a wall, it acts as a shock absorber, killing the vibration before it becomes noise. It turns a makeshift setup into a silent, efficient professional engine room.

Quick spec sheet of the product

• Product Type: Anti-vibration support stand.
• Material: High-durability metal.
• Compatibility: Designed for tubular extractors (check diameter).
• Installation: Suitable for floor or wall mounting (smooth surfaces).
• Function: Vibration absorption and stability.
• Application: Indoor grow rooms, grow tents, and industrial ventilation.

Key advantages over makeshift solutions

Many growers try to fix extractors with duct tape, bungee cords, or just leave them on the floor. While that might work for a day, this bracket offers a permanent fix that improves your entire Air Extraction System.

• Total Stability: Unlike hanging straps that can sway, this bracket holds the extractor rigid. This is crucial if you are connecting rigid ducting or heavy carbon filters.
• Versatile Placement: It allows you to place the extractor outside the grow tent. This frees up valuable space inside for your lights and plants, while keeping the heat of the motor out of the grow area.
• Airflow Optimization: By providing a stable base, you can align your ducting in a straight line. Avoiding curves and bends improves air velocity and reduces the workload on the motor.
• Durability: Made of metal, it withstands the humidity and temperature changes of a grow room without degrading like plastic or fabric straps.

Real benefits you’re going to notice

The first thing you will notice is the silence. By decoupling the vibrating motor from the floor, the resonance disappears. This is key for maintaining discretion in urban environments.

Secondly, you gain peace of mind. You won't have to worry about the extractor rolling over or disconnecting from the ducting while you aren't home. It stays exactly where you put it.

Finally, it makes maintenance a breeze. If you need to clean the blades or check the connections, the unit is accessible and secure, not dangling precariously from the ceiling of your tent.

Step-by-step installation guide

1. Choose the location: Select a flat, smooth surface (floor, shelf, or wall) near your grow area.
2. Prepare the bracket: If you are mounting it to a wall, mark the holes and use appropriate wall plugs and screws. If it's on the floor, ensure the surface is level.
3. Mount the extractor: Place your tubular extractor into the metal rings of the bracket.
4. Tighten: Use the screws provided on the bracket to tighten the rings around the extractor body until it doesn't move. Do not overtighten to avoid denting the casing.
5. Connect ducting: Attach your aluminum or soundproof ducting to the inlet and outlet. Keep the lines as straight as possible.
6. Test: Turn on the extractor and check for vibrations. If it's stable, you are good to grow!

Frequently Asked Questions

Can I use this bracket for any extractor brand?

Yes, the bracket is universal as long as the diameter of the extractor matches the size of the bracket. It works perfectly with most tubular extractors on the market.

Does it eliminate the noise of the air?

No, this bracket eliminates mechanical noise and vibration. To reduce the "whoosh" sound of the air itself, we recommend using soundproof ducting or a silencer.

Can I screw it into a wooden board?

Absolutely. Screwing it into a wooden board is a great way to add extra stability if you are placing it on a carpeted floor or an uneven surface.

Is it better to hang the extractor or use this stand?

Hanging is good for inside the tent, but this stand is superior if you want to place the extractor outside the tent to save space and reduce heat inside the grow area.

Personal Experience of Pevgrow’s CEO (Alan)

I've seen too many growers throw their extractors on the floor behind the tent, thinking "it's fine." But after a week, the vibration drives them crazy. I personally love these metal brackets because they allow me to set up the extraction system outside the closet. This saves me precious vertical space for the lamp and plants. Plus, having the extractor fixed on a solid base makes connecting the Odor eliminator for weed much easier because everything is aligned and stable. It's a small investment for a much more professional setup.